- lumber tycoon 2 phantom wood requires the End Eyeball and End Times Axe.
- Start the route by splitting an oak log and placing both pieces at the purple booth.
- Reach the biome by lowering the bridge beyond its normal position.
- Harvest carefully by cutting branches before separating the main trunk.
- Maximize returns by processing the wood at a sawmill before selling it.
lumber tycoon 2 phantom wood Overview
lumber tycoon 2 phantom wood is obtained from the large End Times Tree in the End Times biome. The route is a high-risk logging trip rather than a normal chopping run: you must manipulate the bridge, drive across a narrow blue-rock path, cut the tree without dropping it into the void, and recover the logs through a separate return route.
The wood is also commonly discussed as End Times Wood, because the tree and biome use the End Times theme. The term “Phantom Wood” remains widely used by players searching for this resource, so both names are useful when looking for trading advice or community guides.
Video Highlights:
- The required End Eyeball and End Times Axe are identified.
- The purple booth method is used to lower the bridge into the End Times biome.
- The tree is cut from its branches first to reduce the chance of losing the trunk.
- The return route uses a hole rather than the main bridge.
- Processing the wood at a sawmill can improve its sale value.
| Requirement | Purpose | Notes |
|---|---|---|
| End Eyeball | Activates the purple booth mechanism | It must fit into the booth’s small slot |
| End Times Axe | Cuts the End Times Tree | Obtain it before beginning the trip |
| Oak logs | Helps balance the End Eyeball | Split one oak tree trunk into two pieces |
| Truck | Transports logs and equipment | Use a vehicle that is manageable on narrow paths |
| Sawmill | Processes harvested wood | Process logs before selling when practical |
Treat the trip as a recovery operation, not a speed run. A stable truck position and controlled cuts are more valuable than reaching the tree quickly.
The End Times Tree can produce valuable logs, but the route has several failure points. Logs can fall into the void, branches can catch on each other, and a misplaced trunk can become difficult or impossible to recover. Prepare your vehicle and tools before attempting the descent.
How to Reach the End Times Biome
The bridge must be lowered farther than its normal position. The key setup uses two oak-log pieces and the End Eyeball at the purple booth near the bridge. Follow the sequence in order, because the logs help stabilize the eyeball while it is being placed.
Prepare the Required Items
Bring the End Eyeball, End Times Axe, truck, and two pieces of oak wood. To create the wood pieces, cut down an oak tree and divide the trunk into two separate sections. Keep the pieces easy to load and move.
Load the Oak Pieces
Place both oak pieces in your truck and drive to the purple booth beside the bridge. Open the booth door and position the logs between the booth mechanism and the glass. Their purpose is to provide support while you place the eyeball.
Insert the End Eyeball
Carefully fit the End Eyeball into the small slot in the booth. The placement can be awkward, so adjust your angle rather than forcing the item. When the eyeball disappears after speaking with the booth character, the activation has worked.
Drive Onto the Lowering Bridge
Enter your truck and drive onto the bridge once it lowers enough to provide access. Stay on the bridge while it continues descending. The unusually long drop indicates that the route is leading toward the End Times biome.
Cross the Blue-Rock Path
After the bridge reaches the lower area, drive onto the blue-rock path. Move slowly and keep the vehicle centered. The path is narrow, and falling can cost both time and access to the harvested wood.
| Stage | Correct action | Main risk |
|---|---|---|
| Oak preparation | Split one oak trunk into two pieces | Oversized pieces may be harder to position |
| Purple booth | Place logs between the mechanism and glass | The eyeball may be difficult to balance |
| Activation | Insert the eyeball and speak with the booth character | Leaving before activation can interrupt the setup |
| Bridge descent | Drive onto the bridge and wait | Moving too early can send the truck into danger |
| Biome approach | Follow the blue-rock path slowly | Tight turns can cause a fall |
Do not rush the bridge sequence. Wait until it has lowered far enough for the truck, and keep your vehicle stable while the platform continues descending.
Once you reach the End Times biome, the tree should be visible near the end of the path. Its position may make the cutting angle easier or harder, so inspect the area before bringing the truck too close.
Harvest Phantom Wood Without Losing It
The most important harvesting rule is to remove the branches before attempting to move the main trunk. The End Times Tree is large, and cutting the trunk too early can cause the tree or its sections to fall into the void. Branches can also tangle together, so each cut should be deliberate.
Branch-First Cutting
Remove outer branches before separating the main trunk. This reduces the tree’s size and makes the remaining pieces easier to control.
Controlled Positioning
Keep the truck away from unstable edges and approach each log from a safe angle. Avoid pushing pieces toward the void.
Section Recovery
Cut manageable sections rather than trying to move the entire tree at once. Smaller pieces are easier to load and retrieve.
| Cutting target | Recommended approach | Why it matters |
|---|---|---|
| Outer branches | Cut them first and allow space between sections | Reduces tangling and uncontrolled movement |
| Connected limbs | Separate one branch group at a time | Prevents several pieces from catching together |
| Main trunk | Cut only after branches are removed | Lowers the chance of losing the central section |
| Truck loading | Move one stable section at a time | Keeps the vehicle from becoming overloaded or unbalanced |
| Loose pieces | Keep them away from the edge | Falling into the void can end the recovery attempt |
Start with the branches closest to the outside of the tree. After each section is cut, pause and check where it landed. If limbs become caught together, reposition yourself instead of making several rapid cuts. Physics glitches and sudden movement are possible, particularly when large sections are connected.
The trunk deserves extra caution. It is usually the most valuable and difficult piece to recover, but trying to force it into the truck can make it roll or fall. If a section begins vibrating or shifting unexpectedly, stop cutting and create more space around it.
Your safest order is branches, smaller limbs, then the trunk. A partial load that survives the route is more useful than a larger load lost to the void.
The tree does not need to be removed in one continuous attempt. If you secure a valuable section, prioritize getting it to the return route rather than continuing to cut until the entire tree is gone.
Return Route and Log Recovery
The return journey uses a different path. Do not plan to drive back up the lowered bridge with every piece of wood. Instead, take the alternate route to the hole, throw the wood through it, and then reset your character so you can collect the pieces from the other side.
Leave the Cutting Area
Back away from the tree carefully and avoid the edge of the blue-rock path. Keep the truck aligned with the route and check that no loose logs are blocking your exit.
Find the Alternate Path
On the way back, use the path that leads toward the hole instead of attempting to climb the bridge. The hole is the transfer point for the End Times Wood.
Throw the Wood Through
Place each harvested section through the hole while keeping yourself positioned so you can continue handling the remaining pieces. Do not throw every log away before confirming that you can still reach the area.
Reset and Wait for Access
Reset your character after the wood has been transferred. If the bridge has not raised when you return, wait for the route to become accessible before collecting the pieces.
Retrieve and Process the Logs
Locate the transferred wood near the exit area, carry it back across the bridge, and place it through a sawmill before selling it at the wood drop-off.
| Return phase | Action | Recovery check |
|---|---|---|
| Departure | Back away from the tree slowly | Confirm logs are not near the edge |
| Alternate route | Follow the path toward the hole | Do not confuse it with the bridge route |
| Transfer | Throw sections through the hole | Leave yourself room to recover remaining logs |
| Reset | Reset after the transfer is complete | Wait if the bridge is still unavailable |
| Final handling | Retrieve, sawmill, then sell | Confirm every valuable section is accounted for |
Sawmill the recovered wood before selling it when your goal is money. Keeping an unprocessed piece can still make sense if you are collecting it as a rare display item.
The hole route is useful because it separates the dangerous harvesting area from the normal selling area. However, it is not risk-free. Throw logs one at a time when possible, and verify their position before resetting. A rushed transfer can leave valuable wood behind.
The final choice is yours: Phantom Wood can be sold for a substantial amount, or it can be saved as a collector’s item. The exact payout depends on how the wood is processed and sold, so treat high-value figures as estimates rather than guaranteed results.
Phantom Wood Checklist and Selling Plan
Use this checklist before and during the expedition. It focuses on the actions most likely to determine whether the trip succeeds.
Phantom Wood Expedition Checklist:
- Bring the End Eyeball and End Times Axe
- Prepare two oak-log pieces for the purple booth
- Load a stable truck before lowering the bridge
- Cut branches before separating the main trunk
- Transfer the wood through the hole before resetting
- Sawmill the recovered logs before selling
For First Attempts
Take fewer cuts, secure smaller sections, and prioritize learning the route over maximizing the load.
For Money Runs
Protect the trunk, process the recovered wood at a sawmill, and avoid risky cuts after securing valuable sections.
For Collectors
Preserve unusual or large pieces instead of selling everything. Labeling and storing sections can make future display planning easier.
| Goal | Best priority | Common mistake |
|---|---|---|
| Learn the route | Reach the biome and return safely | Trying to harvest the whole tree immediately |
| Earn money | Protect logs, sawmill them, then sell | Selling raw wood without processing |
| Collect wood | Save distinctive sections | Throwing away pieces during the transfer |
| Reduce risk | Move slowly and cut in stages | Cutting near the void or overloading the truck |
Plan the return route before making your first cut. Knowing where the hole is located helps you decide which pieces are worth moving and when to stop harvesting.
For reference, the Phantom Wood page on the Lumber Tycoon 2 Wiki is a useful community reference for the item’s terminology. Always compare community information with your current in-game results, especially when evaluating sale values or route behavior.
Phantom Wood FAQ
Q: What is lumber tycoon 2 phantom wood?
Phantom Wood is the player-used name for wood harvested from the End Times Tree in the End Times biome. It is also commonly called End Times Wood.
Q: Which items are required to reach the End Times biome?
The route requires an End Eyeball and an End Times Axe. You also need two pieces of oak wood to help position the eyeball at the purple booth, plus a truck for transportation.
Q: Why should I cut the branches before the trunk?
The End Times Tree is large and can fall into the void if the central trunk is cut too early. Removing branches first makes the remaining sections easier to control and load.
Q: How do I get the wood back after reaching the biome?
Use the alternate route to the hole, throw the harvested pieces through it, reset your character, wait for access if necessary, and retrieve the logs from the return area.
The safest Phantom Wood run is built around preparation, branch-first cutting, controlled transfers, and a planned return. Secure the wood before taking additional risks.