- lumber tycoon 2 end times wood requires the End Times Axe for the special tree.
- Bridge access depends on placing an eye and a prepared piece of wood correctly.
- Safe cutting means removing branches first so the main tree stays manageable.
- Wood transport uses the lower route beneath the bridge before returning to your base.
- Best practice is to bring a vehicle, clear inventory space, and avoid risky jumps.
lumber tycoon 2 end times wood Route Overview
The lumber tycoon 2 end times wood route is a special collection method involving the bridge, an eye item, a prepared wood piece, and the End Times tree area. The route is more technical than ordinary logging because access depends on lowering the bridge and reaching the area below its normal position.
The method has four major phases:
- Prepare the bridge mechanism.
- Ride the bridge down safely.
- Cut the End Times tree with the correct axe.
- Send the logs through the return route and collect them with your vehicle.
Video Highlights:
- The bridge setup uses an eye and a short piece of wood.
- The bridge must be lowered far enough to reach the hidden route.
- The End Times Axe is required to cut the special tree.
- Wood can be pushed through a lower opening before returning to the base.
| Route Phase | Main Objective | Key Requirement |
|---|---|---|
| Preparation | Build the bridge setup | Eye and cut wood piece |
| Descent | Reach the lower bridge path | Vehicle control and timing |
| Collection | Cut the special tree | End Times Axe |
| Return | Move logs back safely | Drop opening and vehicle |
Treat this as a transport route rather than a normal tree farm. Your main goal is to keep the bridge, tree, and return path under control.
The biggest mistake is beginning the trip without preparing the return plan. Bring your vehicle close enough to collect the wood after resetting, but avoid positioning it where the bridge movement or uneven terrain can interfere with loading.
Required Items and Preparation
Before attempting the route, organize every item at your base or near the bridge. The process described for this method uses an eye, a piece of wood cut to a manageable size, and the End Times Axe. The axe is especially important because ordinary axes are not suitable for cutting the End Times tree.
End Times Axe
- Required for the tree
- Keep it equipped before cutting
- Do not rely on a standard axe
Eye Item
- Used at the bridge mechanism
- Must be placed into the small opening
- Check its position before lowering
Prepared Wood
- Cut into a short section
- Helps stabilize the bridge setup
- Use a piece that is easy to position
| Item | Function | Preparation Advice |
|---|---|---|
| Eye | Activates the bridge interaction | Carry it to the bridge booth |
| Short wood piece | Supports the setup | Cut it roughly in half before placement |
| End Times Axe | Cuts the special tree | Keep it available throughout the collection phase |
| Vehicle | Moves logs after collection | Leave room for long or awkward pieces |
The End Times tree is the critical target of this route. Make sure the End Times Axe is available before lowering the bridge, because reaching the area without the correct tool can waste the entire trip.
Cut the wood piece before arranging the bridge setup. A shorter section is easier to balance and less likely to obstruct the placement area. The exact shape can vary, so focus on creating a compact piece that fits the intended position.
Keep your base clear before starting. Long logs can be difficult to place if your sawmill area is crowded, and returning to organize your base halfway through the process creates additional opportunities to lose or misplace the wood.
Bridge Setup Step by Step
The bridge setup is the most precise part of the route. You need to place the prepared wood at the bridge booth, then position the eye in the small opening. When the arrangement is correct, the bridge interaction should acknowledge the setup and begin lowering.
Cut the Support Wood
Take a piece of wood and cut it into a shorter section that can be positioned near the bridge booth. Avoid using an oversized log, since the setup is easier to control with a compact piece.
Place the Wood at the Booth
Carry the prepared piece to the bridge booth and place it in the same general support area used by the route. Check that it is stable before attempting to add the eye.
Insert the Eye
Pick up the eye and carefully place it into the small opening in the bridge mechanism. The eye should remain balanced rather than rolling away or sitting at an angle.
Lower the Bridge
Use the bridge control after the eye is positioned. Wait for the bridge to descend and watch its height before attempting to board.
| Setup Check | Correct Condition | If It Fails |
|---|---|---|
| Wood position | Short piece remains stable | Reposition or recut the piece |
| Eye position | Eye sits in the small opening | Pick it up and try again |
| Bridge response | Bridge begins lowering | Inspect both items before repeating |
| Boarding height | Bridge reaches vehicle level | Wait instead of jumping early |
Move slowly while placing the eye. Small adjustments are safer than repeatedly throwing the item near the opening and risking a failed setup.
Once the bridge reaches vehicle level, board carefully. During the descent, move forward and backward when needed to keep your vehicle from becoming stuck or drifting into an awkward position. Avoid making sharp movements while the bridge is still moving.
The bridge may descend farther than its ordinary stopping point when the setup works. That lower position is what allows access to the route leading toward the End Times tree.
Cutting and Transporting the Wood
After reaching the lower area, follow the path toward the End Times tree. The terrain can punish rushed movement, so keep the vehicle stable and avoid unnecessary jumps. The objective is to cut the tree into pieces that can be transported through the return opening.
Start by removing the branches. Cutting branches first helps keep the main trunk in place and makes the remaining pieces easier to manage. Once the tree is reduced to practical sections, move the wood toward the opening beneath the route.
| Cutting Stage | Recommended Action | Main Risk |
|---|---|---|
| First pass | Remove branches | Tree pieces may shift unexpectedly |
| Trunk cutting | Divide the main tree carefully | Large sections can become difficult to move |
| Staging | Place logs near the opening | Logs can roll into inaccessible areas |
| Drop-off | Send pieces through the hole | Do not overload the route at once |
Do not rush into random cuts. Clearing branches first gives you more control over the trunk and reduces the chance of losing useful wood on the surrounding terrain.
Push or throw the prepared logs down the opening one at a time. Confirm that each piece has entered the return route before moving the next. Sending several large pieces together can make it harder to tell where the wood has gone.
After the wood is through, reset your character and bring your vehicle back to the collection side. This allows you to gather the logs and transport them to your base. Keep the vehicle aligned with the landing area so loading is easier.
Branch Control
Remove branches before making deep trunk cuts. This keeps the tree easier to manage.
Opening Control
Send logs through one at a time and confirm each piece disappears into the route.
Vehicle Control
Return with a clear loading area and avoid parking across the drop path.
Efficiency Checklist and Troubleshooting
The route becomes more reliable when you use the same preparation order every time. Most failures come from missing equipment, unstable bridge placement, poor vehicle positioning, or rushing the lower path.
Before You Start:
- Bring the End Times Axe
- Prepare a short piece of wood
- Carry the eye to the bridge booth
- Clear space at your base and vehicle
- Plan the return and loading position
| Problem | Likely Cause | Recommended Fix |
|---|---|---|
| Bridge does not lower | Eye or wood is misplaced | Rebuild the setup carefully |
| Eye rolls away | Opening placement is unstable | Use slower, smaller movements |
| Vehicle glitches on descent | Vehicle position or movement is poor | Adjust forward and backward gently |
| Tree cannot be cut | Wrong axe equipped | Use the End Times Axe |
| Logs are missing | Pieces were sent through too quickly | Drop one piece and verify the route |
| Loading is difficult | Vehicle or base area is crowded | Clear the loading zone first |
Use a repeatable order: prepare, set the bridge, descend, cut branches, move logs, reset, collect, and return to base.
If the bridge fails, do not continue with a partial setup. Return to the booth and inspect the wood and eye separately. If the vehicle becomes unstable, stop moving until the bridge reaches a safer position. Excessive corrections can make the vehicle harder to control.
If the tree area becomes difficult to navigate, prioritize recovering the logs already cut instead of creating more pieces. A smaller successful load is more useful than losing several sections while attempting to maximize one trip.
For base organization, place incoming logs in a predictable area. This makes it easier to process the wood after the route and prevents new pieces from blocking your sawmill or vehicle access.
Q: What axe is needed for lumber tycoon 2 end times wood?
The route requires the End Times Axe to cut the special End Times tree. Prepare it before lowering the bridge so the trip is not wasted.
Q: What items are used to lower the bridge?
The setup uses an eye and a short piece of prepared wood placed at the bridge booth. The eye must be positioned in the small opening before activating the bridge.
Q: Why should branches be cut first?
Removing branches first helps keep the main tree under control and makes the remaining trunk sections easier to move toward the return opening.
Q: How do I bring the wood back to my base?
Send the cut logs through the lower opening, reset your character, return with your vehicle, collect the pieces, and transport them back to your base.
Practice the bridge setup with a small load first. Once the descent, cutting, and return route feel consistent, increase the amount of wood you transport per trip.