- lumber tycoon 2 conveyor setup works best with a funnel, straight belt, tilted belts, and a final loading segment.
- Direction matters because each conveyor has a side knob that controls the movement direction.
- Use first-person view when connecting belts or correcting small alignment problems.
- Leave room for long logs so wood does not snag between the conveyor and your vehicle.
- Test with several log sizes before treating the layout as finished.
lumber tycoon 2 conveyor setup Basics
A reliable conveyor line starts with a simple purpose: move wood from the sawmill toward a vehicle or storage area without creating gaps, sharp collisions, or reversed belt sections. For most new bases, a compact straight-and-tilted layout is easier to build and maintain than a complicated sorting system.
The core arrangement uses a Funnel Conveyor as the entry point, a Straight Conveyor to create a stable transition, several Tilted Conveyors to guide wood toward the loading area, and a final segment that meets the vehicle. The funnel helps logs land on the line, while the straight belt gives larger pieces a more predictable path before the incline begins.
Video Highlights:
- Identifies the main conveyor types used in a beginner sawmill line.
- Demonstrates placing a funnel conveyor at the sawmill entrance.
- Shows why a straight belt can help prevent large wood from jamming.
- Uses tilted conveyors to guide wood toward a vehicle.
- Recommends checking connections from a first-person perspective.
Build the shortest line that reaches your loading point cleanly. Extra turns and unnecessary belt sections create more places for logs to catch or shift direction.
Recommended Conveyor Roles
| Conveyor | Main role | Best placement | Setup note |
|---|---|---|---|
| Funnel Conveyor | Receives wood from the sawmill | At the line entrance | Point the flow toward the next belt |
| Straight Conveyor | Stabilizes the opening section | Directly after the funnel | Useful before an incline |
| Tilted Conveyor | Raises or guides wood | After the straight belt | Connect each section tightly |
| Tight Turn Conveyor | Changes direction in a compact space | Around a corner | Use only when a straight path is impractical |
| Wood Sweeper | Pushes long wood sideways | Near stacking areas | Test carefully because loose wood can behave unpredictably |
Four Useful Layout Styles
Starter Line
- Funnel entrance
- One straight belt
- Several tilted belts
- Best for a first sawmill
Compact Line
- Short travel distance
- Minimal turns
- Easier to inspect
- Good for small plots
Loading Ramp
- Tilted approach
- Final belt near the vehicle
- Helps guide wood outward
- Requires careful spacing
Sorting Extension
- Switch conveyors
- Multiple destinations
- Logic-ready design
- Better for advanced bases
Build the Conveyor Line Step by Step
The most dependable build process is to place and test each section before adding the next one. This makes it easier to identify whether a problem comes from the belt direction, a poor connection, or the loading position.
Choose the Sawmill Exit
Position the first conveyor beside the sawmill output. Keep the entry open enough for logs to reach the belt without striking nearby signs, walls, vehicles, or decorative supports. A clear entrance is more important than making the line look symmetrical.
Place the Funnel Conveyor
Put the funnel conveyor at the beginning of the line and point its movement direction toward the sawmill or the next belt, depending on how your sawmill is positioned. Check the yellow side knob before testing any wood.
Attach the Straight Conveyor
Connect a straight conveyor after the funnel. Align the connector and confirm that the belt faces the same direction. This section gives logs a stable path before they reach tilted pieces.
Add Tilted Conveyors
Extend the line with tilted conveyors toward the vehicle or unloading point. Attach each section closely and avoid leaving visible gaps. First-person view can make the connector and side knob easier to inspect.
Set the Loading End
Place the final belt so wood can travel into the vehicle without a large drop or side gap. Test the line with a small piece first, then try longer logs before adding decorations or walls.
A conveyor can appear attached while still facing the wrong way. Before loading wood, trace the arrow direction from the sawmill entrance to the final vehicle point.
Placement Sequence
| Build phase | Parts to place | What to verify |
|---|---|---|
| Entry | Funnel Conveyor | Clear sawmill output and correct flow |
| Transition | Straight Conveyor | Tight connection and matching direction |
| Incline | Tilted Conveyors | No gaps, clipping, or reversed sections |
| Loading | Final belt and vehicle | Wood reaches the vehicle without catching |
| Test | Several wood pieces | Small and large logs follow the same route |
Direction and Alignment Checks
Use this quick inspection before starting production:
- Look at the yellow knob on each conveyor.
- Confirm every belt sends wood toward the same destination.
- Enter first-person view when a connector is difficult to line up.
- Remove nearby signs or decorations that block placement.
- Make sure the final conveyor is not too far from the vehicle.
- Run a test log before building walls around the machinery.
Fix Jams, Gaps, and Reversed Conveyors
Even a basic conveyor line can behave inconsistently when logs are oversized, belts are slightly separated, or the final loading point is poorly positioned. Troubleshooting should begin with the simplest checks rather than rebuilding the entire system.
A jam near the entrance usually indicates a direction or alignment issue. A jam near the vehicle often comes from a gap between the final conveyor and the loading area. If wood falls away from the line, inspect the belt angle and the surrounding structure.
Do not enclose the conveyor line until it has moved multiple logs successfully. Decorative walls can make it harder to reach a misaligned connector or remove a stuck piece of wood.
Common Problems and Solutions
| Problem | Likely cause | Recommended fix |
|---|---|---|
| Wood moves back toward the sawmill | Conveyor direction is reversed | Toggle the side knob and retest |
| Logs stop between belts | Visible gap or poor alignment | Reposition the second belt until the connection is flush |
| Long logs catch at the vehicle | Loading gap or awkward angle | Move the final belt closer and reduce the gap |
| Wood falls off a tilted belt | Misaligned incline or side collision | Rebuild the incline with a straighter approach |
| A piece disappears or launches | Physics or conveyor interaction glitch | Clear the line and test again with a smaller piece |
| Placement will not connect | Camera angle or connector position | Use first-person view and rotate the belt carefully |
Troubleshooting Order
- Stop feeding additional wood into the line.
- Remove the piece that is blocking the next belt.
- Check each conveyor’s direction from beginning to end.
- Inspect every connector for a gap or misalignment.
- Test the repaired section with one small log.
- Repeat with a longer piece before resuming production.
Conveyor physics can be unpredictable around sweepers, upside-down pieces, and tightly packed objects. A layout that works with a small item may still need adjustment for long logs. Keep the main route open and avoid forcing oversized pieces through narrow turns.
If only one section fails, repair that section first. If every section sends wood backward, inspect the direction of the first conveyor before changing the rest of the layout.
Improve the Setup for Larger Operations
Once the starter line works, upgrades should focus on control and consistency rather than adding belts randomly. A longer conveyor is not automatically better. The best expansion gives wood a clear destination while preserving access for testing and repairs.
Switch conveyors can redirect materials toward different processing or storage areas. Straight Conveyor Switch Left and Straight Conveyor Switch Right are useful when a base needs branching routes. Logic components can also control conveyor direction, but a manual layout should be stable before adding wiring.
Upgrade Paths
| Upgrade goal | Useful component | Why it helps | When to add it |
|---|---|---|---|
| Change direction | Tight Turn Conveyor | Redirects wood in limited space | When a straight line cannot fit |
| Create branches | Switch Conveyor | Sends wood toward different routes | When operating multiple destinations |
| Redirect left | Straight Conveyor Switch Left | Builds a controlled left branch | After the main route is stable |
| Redirect right | Straight Conveyor Switch Right | Builds a controlled right branch | After the main route is stable |
| Organize long wood | Wood Sweeper | Pushes pieces sideways for stacking | After testing loose wood behavior |
| Automate control | Wires and logic parts | Adds timed or remote direction changes | For advanced conveyor projects |
Expansion Rules
- Keep the main route straight for as long as possible.
- Add turns only where the plot layout requires them.
- Place switches after a stable transition, not directly at the sawmill exit.
- Leave walking space beside important connectors.
- Test each branch independently before feeding both routes.
- Avoid placing fragile decorations where long logs can collide with them.
Leave a service path beside the sawmill and the loading end. A slightly wider base is usually easier to manage than a tightly packed line that cannot be reached when wood jams.
Starter Layout Versus Advanced Layout
| Feature | Starter setup | Advanced setup |
|---|---|---|
| Main route | Funnel, straight, tilted belts | Multiple branches and switches |
| Direction control | Manual side knobs | Wires and logic structures |
| Loading area | One vehicle destination | Several processing or storage points |
| Maintenance | Easy visual access | Requires planned service paths |
| Best use | Learning conveyor behavior | High-volume base organization |
For most players, the starter configuration remains useful even after unlocking more equipment. It provides a dependable baseline for testing new belts, vehicles, and logic systems. Expand from that working line instead of replacing it with a more complicated design without a clear purpose.
Final Checklist and FAQ
Use the checklist below before relying on a new sawmill route. It covers the most common points that affect a lumber tycoon 2 conveyor setup, including direction, spacing, vehicle placement, and testing.
Conveyor Setup Checklist:
- Place the funnel conveyor at the sawmill entrance
- Connect a straight conveyor before the tilted section
- Confirm every yellow direction knob sends wood forward
- Remove gaps between conveyor pieces
- Test small and long logs before adding decorations
Your line is ready when wood travels from the sawmill to the vehicle with no manual pushing, repeated jams, or reversed sections during several test runs.
Quick Reference
| Checkpoint | Pass condition |
|---|---|
| Sawmill entry | Wood lands on the first conveyor |
| Belt direction | Every section moves toward the loading point |
| Connections | No visible gap interrupts the route |
| Tilted section | Logs climb without falling or catching |
| Vehicle end | Wood reaches the vehicle without a large gap |
| Maintenance | Key connectors remain reachable |
Q: What is the best basic lumber tycoon 2 conveyor setup?
A practical beginner layout uses a Funnel Conveyor at the entry, a Straight Conveyor for the transition, several Tilted Conveyors for the approach, and a final belt positioned close to the vehicle. This arrangement is easy to inspect and expand.
Q: Why does my conveyor send wood in the wrong direction?
Check the small yellow knob on the conveyor side. Its direction controls the movement of the belt. Toggle it, then test one piece of wood before checking the next section.
Q: Why do long logs get stuck near the vehicle?
The final gap may be too wide, the conveyor may be at an awkward angle, or the vehicle may be positioned too far away. Move the loading point closer and test with a longer piece after correcting the alignment.
Q: Should I use a Wood Sweeper in a beginner setup?
Usually, it is better to start without one. A Wood Sweeper can help organize long pieces near a stacking area, but it adds another physics interaction that should be tested after the main conveyor route works.
For a visual reference, see the related Lumber Tycoon 2 conveyor tutorial, then adapt the belt order to your sawmill, plot space, and vehicle position. Keep the first design simple, test every connection, and expand only when the current route is stable.